Soundstream REF2.370
Soundstream REF2.370 370W RMS 2-Channel Class A/B Reference Series Model No. REF2.370 Part No. REF2370
|
|
|
On Sale $329.95
Regular $399.95
|
Detailed Description of the
REF2.370:
REF2370
Soundstream REF2.370 370W RMS 2-Channel Class A/B Reference Series Model No. REF2.370 Part No. REF2370
General:
Sequenced Delays Eliminate Residual Power-Up/Power-Down Pops
Differential RCA Inputs Isolate 12V/Audio to Ground, Eliminating Ground Loops and Noise
Full Signal Path Low Noise/Distortion Circuitry Topology
Optimal Component Layout for Minimal Distortion Induction & Signal Separation
Triple Darlington Audio Output Stages
Differential Drives Divide Pre-Amp & Power-Amp Stages, Eliminating Ground Looping
Full Differential Feedback Surrounding Power-Amp Stages directly from Speaker Terminals resulting in Uncolored Sound Reproduction and Elimination of Ground Loops
Output Stage Bias Individually Sequenced, Optimizing Sound Quality
Stout 2 Oz. Copper Traces Effortlessly Transfer High Volume Internal Current
Close Tolerance Signal Path Components - 1% Resistors & 5% Capacitors
Final PCB Layout Designs are culmination of examination and fine tuning of all circuit elements to work in harmony as a whole
Hawkins Boost Control - Proprietary Bass Equalization
Continuously Variable Crossovers
Tri-Mode Capable
PSU:
Pulse Width Modulated
Large TO218 MOSFET Transistors
High Volume, Low ESR Capacitance Banks Compensate Power Supply Ripple Currents
Extra Low Current Drive Stage Increases Efficiency & Sound Clarity
Individually Regulated Preamp/Crossover Power Supplies Ensure Signal Purity
Separated Capacitor Charging/Discharging Current Paths Prevent Rail Switching Spikes & Ground Traces from Entering Signal Stages Resulting in Distortion
Monoblock Models:
True Class G Circuitry and Regulated MOSFET Power Supply. This allows the Subwoofer Amplifiers to Yield the Same POWER at 1-2 ohms, and Regardless of Operating DC Voltage. (You can use almost any amount of woofers, and of any impedance, and wire it to the amplifier safely! See the options in the back of the manual)
Number Of Channels: 2
Low Frequency response: 15 Hz
High Frequency Response: 50000 Hz
Built In Crossovers: Yes
Channel Separation: Yes
Power output:
110 Watts RMS x 2 @ 4 ohms
185 Watts RMS x 2 @ 2 ohms
370 Watts RMs x 1 Bridged @ 4 ohms
Regulated MOSFET power supply
RUBI (Rapid-use branched impulse) proprietary power supply technology
STACT (stabilized apex current technology) reduces power supply stress by 50%
Trident amplifier power technology
Auto high-current, regulates power supply load for application
Triple darlington output circuitry
Hawkins bass control: proprietary bass equalization
Drive delay II eliminates turn-on & turn-off pops
Ultra-low ESR capacitors for rapid power delivery & dynamic transient peaks
Tri-mode operation
Damping Factor: <3000
Signal-to-noise ratio: 102dB
180 degree phase control
30-80hz hawkins bass boost
200mV-9V input voltage
4ga. Power & 8ga direct wire terminal
External Fuse Required 40A
Dimensions: H: 2.25" x W: 9.875" x L: 13.58"
Soundstream 1-Year Warranty
|
